Parts for Gryphon C-Series Bandsaws

Parts for Gryphon C-Series Bandsaws

Band Kit - $22

C-Series-Band-Kit.jpg

Replacement bands for the upper and lower wheels of a C-40 Diamond Band Saw along with a set of bushings for the lower wheel. This kit fits all versions of the C-Series band saws, including the AquaSaws.

When installing the bands, it helps to heat them first to make them easier to stretch. Place them on your dashboard in the sun, soak them in hot water, gently heat with a hairdrier, or use some similar method.

Lower Wheel - $19.50

C-Series-Lower-Wheel.jpg
The Lower Wheel comes with band and bushings installed. This wheel fits all models of the C band saw.

Upper Wheel - $19.50

C-Series-Upper-Wheel.jpg
The Upper Wheel comes with band installed.

Set of Blade Guides - $9

C-Series-guides.jpg
Set of four blades guides for all Gryphon Band Saws. Guides fit either the upper or lower guide holders.

Lower Guide Holder - $14

C-Series-Lower-Guide-Holder.jpg
Guide Holder slides into slot in bottom of saw, beneath platform. Includes Guide.

Platform - $16

C-Series-Platform.jpg
A replacement for the original worksurface of any C-series band saw.

Upper Guide Holder - $7

C-Series-Upper-Guide-Holder.jpg
Upper Guide. Holder slides onto motor cradle. Includes Guide.

Stainless Steel Collar - $6

C-Series-Collars.jpg
Each band saw uses two of the collars (one for each wheel). The price shown is for one collar.

Lower Shaft Assembly - $39.95

C-Series-Lower-Shaft.jpg
Each band saw uses two of the collars (one for each wheel). The price shown is for one collar.

Black Diamond Blade #301BD - Twin Pack - $129.95

C-Series-Lower-Shaft.jpg
A package of two diamond blades. This is our standard blade and the blade that was originally supplied with your saw.

Black Diamond Blade #301BD - $69.95

C-Series-Lower-Shaft.jpg
This is a single standard blade identical to the blade that was originally supplied with your saw.
Also available in a money saving twin pack.

Fuser's Blade #301F- $79.95

C-Series-Lower-Shaft.jpg
This is a heavy duty diamond blade designed for cutting thicker material such as fused glass or thick rock. This blade has coarser diamonds and a thicker base. It leaves a rougher edge than the standard blade and cannot make as sharp a turn as the standard blade.

Dressing Stone - $6.95

C-Series-Lower-Shaft.jpg

 

Use the dressing stone to rejuvinate a worn blade. Cut one or two thin slices off of the stone as shown, and the stone will sharpen your blade, restoring good cutting action. The dressing stone will work on any diamond tools such as saw blades and grinding bits. The six inch length allows for many, many cuts, and a single stone will last many years.

C-40 CR - $399.95

The C-40 CR has been modified for corrosion resistance, especially for use with salt water while cutting coral or similar material. Additional stainless steel parts and added shielding reduce corrosion and extend the life of the saw. The saw is supplied with a stainless steel blade in place of the normal copper blade.

C-40 CR Custom - $439.95

This saw is specially made with taller supports to allow an extra 2.5" of clearance height. This provides over 5.5" of clearance with the upper blade guide removed. This saw uses a 42" diamond blade, and in other respects is the same as our C-40 CR, which is a special version of the C-40 that has been modified to be more resistent to corrosion. Choose this saw if you are using a diamond band saw in a corrosive environment such as salt water and need extra clearance to cut taller coral or other objects. This saw features all of the benifits of the regular C-40 with components upgraded to stainless steel or otherwise specially treated.

Stainless Steel Blade #301SS - $69.95

This 36" stainless steel blade is designed specifically for use on our C-40 CR when used to cut certain corals. For all other C-40 applications, please order the standard copper 301BD blade.

Stainless Steel Blade #301SS-42 - $79.95

This 42" stainless steel blade is designed specifically for use on our C-40 CR Custom (the taller saw). For regular C-40 applications, please order the standard copper 301BD blade.