videolinkC-40 CR

AquaSaw XL

-- Model C-40 CR Custom

This Corrosion Resistant AquaSaw is designed for use with salt water and is generally used to cut corals. It is based upon the regular C-40, but has improvements designed to reduce maintenance when the saw is used in a corrosive environment, such as with salt water. The XL version of this saw adds about two inches of height to the saw, enabling the cutting of larger pieces. It uses a 42" stainless steel blade, and in all other respects is identical to the AquaSaw model C-40 CR.

PDF spec sheet
Instructions

Purchase

Features

  • Simple construction with few moving parts
  • New High Speed Motor for fastest cutting available. Motor has sealed bearing for improved resistance to corrosion.
  • Direct drive - no belts or pulleys
  • Powerful motor located on top, away from the water. A shield is provided around the bottom of the motor to deflect salt water splash.
  • Huge water reservoir under the work surface
  • One square foot of unobstructed work surface
  • Under table blade guide and blade guide above table.
  • Metal parts are stainless steel or hard anodized aluminum.
  • Supplied with 42" stainless steel blade.
  • Motor:
  • 1/3 hp Direct Drive DC
  • Maximum Clearance:
  • 4.5" (5.75" with Upper Guide Removed)
  • Blade Speed:
  • 40 mph
  • Platform Area:
  • One Square Foot
  • Weight:
  • 18.0 lbs
  • Coolant System:
  • Recirculating tap or salt water
  • Coolant Reservoir:
  • 10 inches by 9 inches
  • Tension Adjustment:
  • Single Knob - Semi-automatic
  • Blade Dimensions:
  • 42" circumference, .020" wide, .140" deep
  • Warranty:
  • 1 year