videolinkC-40 CR

AquaSaw

-- Model C-40 CR

This Corrosion Resistant AquaSaw is designed for use with salt water and is generally used to cut corals. It is based upon the regular C-40, but has improvements designed to reduce maintenance when the saw is used in a corrosive environment, such as with salt water. Youtube has several videos posted by fragging clubs and private owners showing the saw in use (search for "aquasaw").

PDF spec sheet
Instructions

Purchase

Features

  • Simple construction with few moving parts
  • New High Speed Motor for fastest cutting available. Motor has sealed bearing for improved resistance to corrosion.
  • Direct drive - no belts or pulleys
  • Powerful motor located on top, away from the water. A shield is provided around the bottom of the motor to deflect salt water splash.
  • Huge water reservoir under the work surface
  • One square foot of unobstructed work surface
  • Under table blade guide and blade guide above table.
  • Metal parts are stainless steel or hard anodized aluminum.
  • Ships with stainless steel blade, however the saw can use any Gryphon blade.
  • Motor:
  • 1/3 hp Direct Drive DC
  • Maximum Clearance:
  • 2.5" (3.75" with Upper Guide Removed)
  • Blade Speed:
  • 40 mph
  • Platform Area:
  • One Square Foot
  • Weight:
  • 18.0 lbs
  • Coolant System:
  • Recirculating tap or salt water
  • Coolant Reservoir:
  • 10 inches by 9 inches
  • Tension Adjustment:
  • Single Knob - Semi-automatic
  • Blade Dimensions:
  • 37" circumference, .020" wide, .140" deep
  • Warranty:
  • 1 year